Products

Author

• Arbortext S1000D Authoring
• Arbortext ATA Spec 1000BR Authoring

Validate

• S1000D BREX-Schematron Validation

Print

• S1000D Data Module to PDF
• ATA Spec 1000BR Data Module to PDF
• S1000D Data Module to HTML5

Publish

• S1000D Publication Module to PDF
• ATA Spec 1000BR CMP to PDF
• S1000D POH/AFM to PDF

ATA Spec 1000BR Data Module to PDF

We have developed a set of vendor-neutral, standards compliant (W3C XSL Version 1.1 ) stylesheets to convert your ATA Spec 1000BR Data Module to PDF. This allows authors to create a PDF for review by a remote Subject Matter Expert and/or for submission to an Equipment Sponsor for final sign-off and approval.

Print & Publish Differences

It is important to understand that when Printing an ATA Spec 1000BR Data Module, there will be differences between the Printed and Published outputs...

Items 1 to 6 below are linked to the red numbers 1 to 6, included in the Printed Output image above and the Published Output image below.

1. In the Published header, some of the information comes from the root Publication Module. In our Printed output, we are making very clear that the output is a Standalone ATA Spec 1000BR Data Module.
2. References to equipment, supplies and spares in the preliminary requirements are consolidated at the Topic level when Published so the identifying number, located in the brackets, will not necessarily match the Printed output. "Tool (3)(Sponge)" in the Printed output and the "Tool (8)(Sponge)" in the Published output are both pointing to the same item but in the Published output, there are Procedure Data Modules in this Topic located before this current Procedure Data Module.
3. In the Published output, references to another Data Module will link the user to that Data Module. The Printed output is a single Data Module so references will display as a link but cannot link to anything.
4. In a Topic, Table numbering runs sequentially through all Data Modules located within that Topic. If the Printed and the Published Table numbering does not match, it is because there are additional tables located in the Data Modules preceding the current Data Module in the Published output.
   
   Additional: In the Published output, the Table numbering includes a Topic code identifier which is sourced from the Publication Module. The Printed output does not have access to the Publication Module and as such, the Topic code identifier is substituted with XXXX
5. The Printed output ends when the Data Module ends while the Published output may include additional Data Modules.
6. In the Published footer, all of the information is sourced from the root Publication Module. The Printed output does not have access to the Publication Module and as such, the information is substituted.

---

Assisted Start-up

We can provide an Assisted Start-up for this product.

Assisted start-up is a customer-centric blend of product setup support, initial configuration familiarisation and a customer specific workshop to ensure you are up and running.

For more information, please...

Get in touch

---